manualshive.com logo in svg

South-Tek Systems Quick-Check 10, Руководство пользователя, Страница: 28 / 29

Поделиться
Скачать
South-Tek Systems Quick-Check 10 Скачать руководство пользователя страница 28

Quick-Check PowerSaver Manifold 10 & 20 Port                                                                                      South-Tek 
Systems        

Revision: 0 
Revision Date: 8/30/17 

 

        

 

 

 

     Page 28 of 29 

 

                                                                                      

 

11

 

KEY CONTACTS 

For any questions with the performance and/or maintenance of the system, contact: 
South-Tek Systems 
2940 Orville Wright Way, Wilmington, NC 28409 
Phone: 1-(888)-526-6284, Ext. 127 
Email: 

[email protected]

 or 

[email protected]

  

Visit: 

www.southteksystems.com 

APPENDIX A: WARRANTY 

The Quick-Check PowerSaver Manifold is warrantied against any defects in workmanship and materials for 12 months 
from the date of shipment from South-Tek Systems.  The purchaser has the liability to ensure that the system is fully 
inspected upon delivery and shall contact the appropriate shipping company to make any claims on damaged goods 
due  to  transit  within  that  shipping  company’s  policies.    If  the  system  is  received  with  defects  that  are  not  due  to 
shipping, a written claim should be submitted to South-Tek Systems within 1 week of receiving the shipment.  South-
Tek Systems can deny all other claims at their discretion. 
 
All warranty work shall be done at a South-Tek System facility or at a PSA Nitrogen Generator Authorized Service 
Center.  Only  factory  trained  and  authorized  personnel  are  covered  under  warranty.  Any  part  that  is  returned  / 
repaired / replaced under warranty may be remanufactured or changed to a different specification at the factory’s 
option.  Any  work  performed  by  an  unauthorized  person/company  or  usage  of  non-factory  parts,  may  void  all 
warranties to the product.    
 
Any item not manufactured by South-Tek may carry its own warranty from its manufacturer and will be warrantied 
under that manufacturer.  All parts that need to be returned should be announced.  Any item(s) that is returned to 
South-Tek  Systems  without  an  RMA  number  (return  authorization  number)  may  be  denied  and  returned  to  the 
sender.  Contact the factory for RMA #’s, prior to returning shipment. 
 
South-Tek  Systems  is  not  liable  for  damages  caused  by  normal  wear  and  tear,  water,  fire,  erosion,  corrosion, 
explosion, misuse, oil/gas vapors or unauthorized modifications.  South-Tek Systems is also not liable for any losses, 
damages, or cost of delays, including incidental or consequential damages.  There are no warranties or guarantees, 
expressed or implied, including the warranties of merchantability or fitness for a particular purpose or use, other than 
those warranties expressed herein.   
 
For Claims, contact South-Tek Systems LLC at: 
Phone: (888) 526-6284 
Email: 

[email protected]

 

Or write to: 
South-Tek Systems, Warranty Claims, 2940 Orville Wright Way, Wilmington, NC, 28409 

Содержание Quick-Check 10






























Отзывы:

Нет отзывов