South bend SB1117, Руководство пользователя

Страница: 19 / 48

South Bend Tools
For Machines Mfd. Since 12/20 Model SB1117
-17-
P R E P A R A T I O N
Assembly
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to Required for Setup on Page
10 and gather all listed items. To ensure the
assembly process goes smoothly, first clean any
parts that are covered or coated in heavy-duty
rust preventative (if applicable).
To assemble machine:
1. Remove (2) eye bolts used for lifting (see
Figure 14).
Note: Save eye bolts in case you need to move
machine later.
2. Loosen back stop lock knob (see Figure 14)
and open belt guard and back stop door.
Assembly of the Model SB1117 consists of
installing the sanding belt and end table.
4.
Move belt tension lever up and toward
contour drum, as shown in Figure 16.
Figure Figure 16. Moving belt tension lever to un-tensioned . Moving belt tension lever to un-tensioned
position. position.
Belt Tension Belt Tension
Lever Lever
Figure Figure 14. Lifting eye bolts and access door . Lifting eye bolts and access door
components. components.
Eye Bolt Eye Bolt
(1 of 2) (1 of 2)
Back Stop Back Stop
Lock Knob Lock Knob
Belt Belt
Guard Guard
Figure Figure 15. Location of dust hood lock handle. . Location of dust hood lock handle.
Dust Hood Dust Hood
Dust Hood Dust Hood
Lock Handle Lock Handle
3. Loosen dust hood lock handle to open end
table dust hood (see Figure 15).
Back Stop Back Stop
Door Door