background image

WARRANTY

This quality product is warranted by South Bend Tools to the original buyer for 2 years from the 

date of purchase. This warranty does not apply to consumable parts, or defects due to any kind of 

misuse, abuse, negligence, accidents, repairs, alterations or lack of maintenance. We do not reimburse 

for third party repairs. In no event shall we be liable for death, injuries to persons or property, or for 

incidental, contingent, special or consequential damages arising from the use of our products.

We do not warrant or represent that this machine complies with the provisions of any law, act, 

code, regulation, or standard of any domestic or foreign government, industry, or authority. In no 

event shall South Bend’s liability under this warranty exceed the original purchase price paid for 

this machine. Any legal actions brought against South Bend Tools shall be tried in the State of 

Washington, County of Whatcom.

This is the sole written warranty for this machine. Any and all warranties that may be implied by 

law, including any merchantability or fitness, for any purpose, are hereby limited to the duration of 

this warranty.

Thank you for your business and continued support.

To take advantage of this warranty, you must register it at https://www.grizzly.com/secureforms/

warranty-card, or you can scan the QR code below to be automatically directed to our warranty 

registration page. Enter all applicable information for the product.

WARRANTY

southbendtools.com

Warranty

Содержание SB1100





























































Отзывы: