South Bend Tools SB1102, Руководство пользователя

Страница: 14 / 60

-12-
For Machines Mfd. Since 12/21
South Bend Tools
Model SB1102
P R E P A R A T I O N
Unpacking
This item was carefully packaged to prevent
damage during transport. If you discover any
damage, please immediately call Customer
Service at (360) 734-1540 for advice. You may
need to file a freight claim, so save the containers
and all packing materials for possible inspection
by the carrier or its agent.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Box 1 (Figures 5–6) Qty
A. Drum Sander ..................................................1
B.
Handwheel .....................................................1
C. 4" Dust Port (Flat) .........................................1
D.
4" Dust Port (Concave) ..................................1
E. Handwheel Handle ........................................1
F.
Hex Bolts
3
⁄
8
"-16 x 2" ......................................3
G. Flat Washers
3
⁄
8
" .............................................3
H.
Tap Screws #8 x
1
⁄
2
" ........................................8
I. Flat Washers #8 .............................................8
J.
Hex Wrench 3, 5mm ............................... 1 Ea.
K. Tension Tool ...................................................1
NOTICE
If you cannot find an item on this list, carefully
check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpacking or
they are pre-installed at the factory.
Figure Figure 5. Drum sander. Drum sander.
A A
Figure 6. Loose inventory. Figure 6. Loose inventory.
G G
H H
D D
C C
B B
E E
F F
II
JJ
K K