ST2523 Series Operation Manual Ver1.2
11
Start Save/Stop Save: the current measurement results will be saved to a U disk.
Until a U disk is inserted, the save function is disabled.
N
NN
O
O
O
T
TT
E
EE
:
::
Save operation:
Be sure to press “Stop Save” to stop saving data after “Start Save” is pressed,
otherwise data will be lost.
SHORT zero adjust:
When this key is used for short clearing, the test fixture must be shorted
correctly, or it will result in relative data error and finally it will deviate from the accurate
measurement result. The correct short connection is shown as follows.
3.2
<BIN DISP>
Press the [DISP] button and press
BIN DISP
in soft key area to enter into the <
BIN DISP
> page, as is shown in
figure 3-2 and 3-3.
Figure 3-2 Bin Display Page
