ST2523 Series Operation Manual Ver1.2
8
Chapter 3 Basic Operations
3.1
<MEAS DISP>
Press down [DISP], the <MEAS DISP> page will be displayed in the screen, as is shown in figure 3-1.
Figure 3-1 Measurement Display
The following measurement parameters can be set in this page.
Measurement Function (
FUNC R-X
)
Impedance Range (
Range
(R)
AUTO
)
Voltage Range (
Range
(V)
AUTO
)
Measurement Speed (
Speed MED
)
File Management (
FILE
)
Other Tools (
TOOLS
)
Soft Keys (used to enter into operation pages)
The following information will be displayed in the display zone of measurement result/ conditions. These
conditions can be set on pages of <MEAS SETUP> and <MEAS DISP>.
Voltage/ current monitoring of DUT (
Vm
,
Im
).
ON/OFF status indicator of the REL function. (
ON indicates that the current displayed value has been
dealt with by the relative function
).
ON/OFF status indicator of SHORT function (
ON indicates that the current displayed value has been
dealt with by the short function.
)
