ST2515 Operation Manual
89
9.3
Marks
The following marks can be seen on instrument panel and/or nameplate:
a.
Manufacturer name and trademark
b.
Product name and model
c.
Product number and date
d.
the License for Manufacturing Measurement Instruments and its number
e.
Marks for test terminal
9.4
Package
The instrument, generally wrapped in a plastic bag, should be packed in a strong packing box that
could resist dust, vibration and moisture. Accessories, spare parts, operation manual and
manufacturer certificates, etc. should also be included in it.
9.5
Shipping
In the shipment, the instrument should be handled with care and some precautions must be
taken to resist moisture and water.
9.6
Storage
The instrument should be stored in an airy room where the environment temperature ranges
from 5°C to 40°C, relative humidity is not greater than 85% and the air contains no detrimental
impurities that might corrode the instrument.
9.7
Warranty
This Sourcetronic instrument product is warranted against defects in material and workmanship
for a period of two years from the date of shipment. You should supply us with the warranty card
before you enjoy the free maintenance service. This warranty does not apply in the event of
misuse or abuse of the product or as a result of unauthorized alterations or repairs. Sourcetronic
will, without charge, repair or replace, at its option, defective product or component parts.
The maintenance for this instrument should be performed by professional maintenance
personnel. Do not substitute the internal components unauthorized when maintaining. In order
to ensure the measurement accuracy, the instrument must be measured, calibrated and, if
necessary, adjusted after maintenance. You should bear the maintenance expense for damages
caused by unauthorized repairing or substituting components.
