ST2515 Operation Manual
3
2)
Introduction to Front and Rear Panels
This chapter will describe the basic operation of ST2515. Before using the instrument, please read
this chapter carefully.
2.1
Introduction to Front Panel
Figure 2-1 shows the front panel of ST2515.
POWER
MEAS
SYSTEM
FILE
0 ADJ
TRIGGER
ENTER
DRIVE
SENSE
D
U
T
HI
LO
Match the arrowand color
whileconnectingthe test leads.
CAUTION:
!
INPUT
ST2515
DCRESISTANCE METER
1
2
3 4 5 6
7
12
11
9
8
10
Figure 2-1 Front Panel
1)
USB interface
HOST interface of USB
2)
LCD and touch screen
480*272 dot-matrix, 24-bit, 4.3-inch TFT and touch LCD is used for measurement setup and
result display.
3)
[MEAS]
Press [MEAS] to enter into the MEAS DISP page.
4)
[FILE]
Press [FILE] to enter into the page of internal and external File Manage.
5)
[SYSTEM]
Press [SYSTEM] to enter into the SYSTEM SETUP page.
6)
[0 ADJ]
Press [0 ADJ] to execute correction function.
7)
Test terminals (INPUT)
4-terminal test terminal is used to measure DUT by a 4-terminal test cable.
