ST2515 Operation Manual
10
zone.
↑ (+) Increase the range.
↓ (-) Decrease the range.
2)
Touch the corresponding soft key to select the required range.
3.1.3
Measurement Speed
The measurement speed of ST2515 is decided by the following factors:
Integral sampling period (approx. 5ms)
Average times (measurement times)
Measurement delay time (a time starting from the measurement start-up to the
measurement beginning)
Time showing measurement result
Three measurement speeds are available on ST2515: FAST (fast, approx. 50meas/sec), MED
(medium, approx. 6meas/sec) and SLOW (including SLOW1 and SLOW 2, approx. 2meas/sec).
Operation steps for setting measurement speed:
ST2515 displays the measurement result as a 6-digit number in the decimal point floating mode.
In FAST mode, the result is shown as a 5-digit number while in MED and SLOW, as a 6-digit
number and temperature as 4-digit.
1)
Touch the speed zone, the following soft keys will be displayed.
FAST
MED
SLOW1
SLOW2
2)
Use above soft keys to modify the speed.
3.1.4
File Manage
1
）
Touch FILE, the following soft keys will be displayed.
File Manage: Touch this key to enter into the file operation page.
Screen Copy: Touch this key to capture the current screen and save it to a U disk in image
format. Before a U disk is inserted, the save function will be disabled.
2) As for File Manage, please refer to 4.2 for details.
3.1.5
Tools
Operation steps for setting tools:
Touch TOOLS, the following soft keys will be displayed in the soft key zone.
Display (ON/OFF): Display the measurement result or not. ON is to display, OFF is not to
display.
0 ADJ (ON/OFF): OFF means the base number at the short correction will not be subtracted
while ON is to subtract the base number.
