ST2515 Operation Manual
6
This zone displays all prompt information.
7.
Function zone
This zone is used to change the measurement parameters.
2.4
Introduction to Buttons on Front Panel
2.4.1
[MEAS DISP]
Press <MEAS DISP> to enter into display homepage. Selectable functions in this page are shown
as follows:
<MEAS DISP>
<COMP DISP>
<BIN DISP>
<STATIS DISP>
< >
<MORE 1/2>
<MEAS SETUP>
<TC/∆t SETUP>
<BIN SETUP>
<SYSTEM SETUP>
< >
<MORE 2/2>
2.4.2
[SYSTEM SETUP]
Press the [SYSTEM] button to enter into the <SYSTEM SETUP> page; the following soft keys will be
displayed:
<SYSTEM SETUP>
<LAN SETUP>
<MEAS DISP>
2.5
Simple Operation
Simple operation steps for ST2515:
Use [MEAS], [SYSTEM] or [FILE] or soft keys to enter into the page required to enter. (Refer
to figure 2-5)
Use arrow buttons ([←] [↑] [→] [↓]) to move the cursor to desired zone.
When the cursor is moved to a soft key zone, press ENTER to confirm the selection. If it is
required to input a number or a file name, use the keyboard to input and press ENTER to
finish entry. You can use arrow buttons to select a number or a letter.
