ST2515 Operation Manual
5
7)
TEMP.INPUT
It is used to insert the temperature sensor or serve as the input interface of analog temperature.
8)
USB Interface
PC can remotely control ST2515 through USB DEVICE.
9)
LAN Interface
This instrument can communicate with PC by this interface.
10)
HANDLER Interface
Through HANDLER interface, an automatic test system can be conveniently constructed to realize
auto test. ST2515 will output bin comparator result signals, measuring result and some simple
signal control. Please refer to the introduction of HANDLER in Chapter 8 for specific information.
2.3
Display Zone
ST2515 adopts 24-bit 4.3-inch LCD touch screen with a resolution of 480*272. The display screen
is divided into the following zones, as shown in figure 2-3.
Figure 2-3 Display zone
1.
Page name
This zone shows the current page name.
2.
FILE
In this zone, file manage can be executed such as File Manage, Screen Copy.
3.
TOOLS
Some short-cut functions can be set: DISP ON/OFF, 0 ADJ ON/OFF, 0 ADJ, OVC ON/OFF, SelfCalib
AUTO/MANU, Save Data.
4.
Soft keys
This zone displays the function menu corresponding to the cursor-located zone.
5.
Result display
This zone displays the measurement result such as resistance and temperature.
6.
Prompt information
