ST2515 Operation Manual
4
The color and arrow of the test cable should correspond to that of socket on panel, thus to
avoid abnormal measurement.
8)
[TRIGGER]
When the trigger mode is set as MANU (manual), pressing this key can trigger the
instrument manually.
9)
[ENTER]
Press this key to terminate and store input data.
10)
Universal Arrow Keys
There are four arrow keys: up, down, left and right arrow keys.
11)
Trademark and Model
Show instrument trademark and model.
12)
POWER
It is the power switch.
2.2
Introduction to Rear Panel
Figure 2-2 shows the rear panel of ST2515.
HANDLER
GPIB
USB
LAN
EXT HOLD
RS-232C
！
~
110V-240V
50/60Hz 30VA
S/N:
R5-211-00001
1
2
3
4
5
6
7
8
9
10
Figure 2-2 Rear Panel
1)
GPIB Interface (Option)
The GPIB interface is used to communicate with PC and further construct a GPIB test system.
2)
Ground Terminal
This terminal connects the instrument chassis thus to protect or shield ground connection.
3)
RS232C Serial Interface
It realizes serial communication of the instrument with PC.
4)
Nameplate
It shows the instrument model.
5)
Fuse socket
Fuse will be placed in this socket to protect the instrument.
6)
Power Socket
It is used to input AC power.
