Source fire Sourcefire 3D System Скачать руководство пользователя страница 119

Страница: 119 / 280

Version 5.2

Sourcefire 3D System Installation Guide

119

Using the LCD Panel on a Series 3 Device

Information Mode

Chapter 5

Press the right arrow ( ) key on the bottom row to access System Status

mode.
The LCD panel displays the following:

Resources



Link State



Scroll through the options by pressing the down arrow (



) key. Press the

right arrow key in the row next to the status you want to view.
Depending on the option you chose, the LCD panel displays the information

listed in the

System Status Mode Options table

on page 118. To change the

LCD panel brightness or contrast, see the next procedure.

To adjust the LCD panel brightness or contrast:

In System Status mode, scroll through the options by pressing the down

arrow (



) key until the LCD panel displays the LCD Brightness and LCD

Contrast options:

LCD Brightness



LCD Contrast



Press the right arrow key in the row next to the LCD display feature

(brightness or contrast) you want to adjust.
The LCD panel displays the following:

Increase

Decrease

Press the right arrow key to increase or decrease the display feature you have

selected.
The LCD display changes as you press the keys.

Press the down arrow to display the Exit option:

Decrease

Exit

Press the right arrow key in the Exit row to save the setting and return to the

main menu.

Information Mode

The LCD panel’s Information mode displays identifying system information such

as the device’s chassis serial number, IP address, model, and software and

firmware versions. Sourcefire Support may require this information if you call for

assistance.

Содержание Sourcefire 3D System

























































































































































































































































































Результаты поиска

Содержание Sourcefire 3D System

Отзывы:

Source fire Sourcefire 3D System, Руководство по установке, Страница: 119 / 280

Результаты поиска

Содержание Sourcefire 3D System

Отзывы: