Source Audio Soundblox 2 STINGRAY Скачать руководство пользователя страница 10

EXTERNAL CONTROL

 

GUITAR IN

MULTI-

FUNCTION

IN

MULTI-

FUNCTION

OUT

GUITAR OUT

9V DC

A

One of the core features of the Soundblox 2 line of effects is the MULTI-

FUNCTION Input (A).  The MULTI-FUNCTION input is an intelligent control 

input that accepts both digital and analog control signals.  It replaces the 

SENSOR input on previous Soundblox pedals.  The MULTI-FUNCTION input 

connects to wired or wireless Hot Hand accessories, the Source Audio 

Expression Pedal, or the Source Audio Soundblox HUB.  The Soundblox HUB 

provides full MIDI I/O, a standard passive expression pedal input, a dedicated 

Hot Hand input, and USB connectivity.  The HUB can connect up to 5 

Soundblox 2 pedals together to share control inputs or to save multi-pedal 

presets via the Scene Saving functionality.

  

External Control

  | 19

10 |  

Controls: Knobs

 

 

 

Press button to

select option

•  

MIX (Green LED): 

 Adjusts how much of the dry signal (no effect), wet 

signal (full effect), or wet signal with “LoRETAIN”, are blended together.  

The 12 o’clock position produces a 100% dry signal.  As the knob is turned 

clockwise from 12 o’clock, the wet signal gradually increases as the dry 

signal decreases, until reaching a 100% wet signal at the knob’s 

maximum position (fully clock-wise).  As the knob is turned counter-

clockwise from the 12 o’clock position, the dry signal decreases as the 

wet signal with “LoRETAIN” gradually increases, until reaching a 100% 

wet signal with “LoRETAIN” at the knob’s minimum position (fully 

counter-clockwise).  “LoRETAIN” assures a solid low-end foundation, 

“LoRETAIN” adds in a considerable amount of the lowest frequencies in

the dry signal, so the initial thump and bottom end is preserved even

after the filter effects are applied.

•  

VOLUME (Red LED):

  Adjusts the output level of the pedal, ranging from 

zero output to +6dB.  Unity gain (equal volume to the bypass signal) is 

found roughly at 12 o'clock.  Changing RESONANCE or DRIVE may affect 

the output volume.

Stingray Manual - pages 10, 19

Содержание Soundblox 2 STINGRAY





























Отзывы: