Athearn Genesis GP38-2
Tsunami Digital Sound Decoder Installation Notes
Overview
This application note describes how to install a
TSU-GN1000 digital sound decoder into an Athearn
Genesis HO GP38-2.
Skill Level 2: The entire installation can be completed in
one to two hours with no modification required to the
model.
Bill of Materials
Part No.
Description
828058
TSU-GN1000 for EMD 645 Non-Turbo
810113
16mm x 35mm Oval Speaker
Evergreen P.N.
9040
1mm Sheet Styrene
175
2.5mm Strip Styrene
For your convenience, Evergreen part numbers have been
listed above. Please visit their website at
www.evergreenscalemodels.com.
Tools You Will Need
■
25W Soldering Iron
■
Rosin Core Solder
■
Wire Strippers
■
Wire Cutters
■
X-Acto Knife
■
Miniature Screwdriver Set
■
#55 Miniature Drill Bit
■
Pin Vise or Electric Drill
■
Aquarium Sealant / Silicone
■
Liquid Plastic Cement (Tenax 7R or equivalent)
■
Masking Tape
■
Small Pliers
■
6” 28 Gauge Wire
■
Miniature Saw for Plastics
■
File for Plastics
■
Metal Straight Edge
■
Dial Calipers
