soundsation Zeus II D Series, Руководство пользователя

Страница: 8 / 36

8
ENGLISH
ZEUS II D-series User manual
7)^CLIP indicator
Two orange LEDs, each assigned to a channel, indicate when the corresponding channel
has an output overload. Some flashing may be normal but if these LEDs remain on for a
long time, please reduce the input signal levels until the LEDs turn off.
8)^PROTECT indicator
Two red LEDs, each assigned to one channel. When these LEDs light up it means that
the corresponding channel is in protection mode (speaker is cut off by relay) and that a
possible damage is in progress.
9)^VENTILATION grille
It allows constant ventilation between the front and back of the amplifier. It is suggest-
ed not to obstruct this grill.
5. REAR PANEL
1 2 3 4
5 6 7
1)^AC POWER CABLE AND AC VOLTAGE
D-Series amplifiers is set to suit the specific AC voltage. Products can safely work under
the normal variation range of AC voltage, but rated performance can be only reflected
at rated voltage.
Note: If you happen to damage the AC line-cord, always use a three-pin plug
with a ground pin. The wire correspondence is as follow:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
Always connect the earth! Pay attention to your safety!
Before taking into operation for the first time, the installation has to be approved by an
expert.
2)^OUTPUT CONNECTORS
Each channel has one Speakon® output for connecting to the loudspeakers.