soundsation ZEUS D, Руководство пользователя

Страница: 6 / 12

6
D300
– D900
front and rear panels
1 – POWER ON : Toggle to switch on/off the power
2 – CH A VOLUME: Rotate the knob to increase/decrease the volume of Channel A
3 – LED Indicators:
SIGNAL : It lights up when a signal arrives on the input of the related
Channel
CLIP : It lights up when the signal on the input is too high and so can cause
a distortion
POWER : It indicates that the unit is powered up.
4 – CH B VOLUME : Rotate the knob to increase/decrease the volume of Channel B
5 – GROUND – It helps to fix hum or noise problems due to ground problems.
6 – MODE –
It switches from STEREO to BRIDGE configuration
7 – INPUTS – Each Channel is equipped with a balanced XLR connector as well as a balanced
TRS Jack input.
8 – OUTPUTS – These are the connection for the passive speakers (Speakon and 5-way
binding post standard)
9 – AC INPUT – This is the power supply connector. The unit accept 115V or 230V 50/60Hz.
If you receive a unit not set with your country voltage standard contact your dealer
immediately!
OPERATION