soundsation Mood 107 Wash, Руководство пользователя

Страница: 9 / 16

9
ENGLISH
Mood 107 wash User manual
Complimentary signal cable can transmits signals to 20 unit fixtures at most.
Signal amplifier is a must to connect more fixtures.
5.2. 3-Pin vs 5-Pin DMX cables
DMX connection protocols used by controllers and fixtures manufacturers are not stan-
dardized around the world. However, two are the most common standards: 5-Pin XLR
and 3-Pin XLR system. If you wish to connect MOOD 107 WASH to a 5-Pin XLR input
fixture, you need to use an adapter-cable or make it by yourself.
Following the wiring correspondence between 3-Pin and 5-Pin plug and socket stan-
dards
5-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-Pins XLR (socket)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-Pins XLR (plug)
Pin 1: GND (Screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
6. FRONT & REAR PANELS
Front panel is composed by a 4-digit LED display and four buttons (MODE/ESC, UP,
DOWN, ENTER), which help the user to adjust all functions described in the following
paragraphs. The fixture is really easy to be controlled.
MODE/ESC UP DOWN ENTER
Rear panel has following connections (starting from left side):
f
AC MAINS Input connector with Fuse (2A - 250V)
f
DMX IN & OUT: 3-poles XLR Male/Female connectors for DMX512 protocol com-
munication