soundsation HYPER 8 STREET, Руководство пользователя

Страница: 9 / 24

9
ENGLISH
Hyper 8 Street User manual
f
LIVE: Similar to the Music preset with the LF lift frequency shifted.
f
Speech: A bass roll-off with flat mid and upper frequencies.
Note: The EQ setting is stored and recalled following a power cycle.
8) Mix Out
It is a MONO Output with unbalanced Line-Level signal. It contains the mix of all inputs
and all controls.
9) Master LEVEL
This controls the overall level of the speaker. Set this knob to minimum before connect-
ing an audio signal. Once the system is powered up, we recommend that the MASTER
is set to midway as a good starting point. Then you can adjust according to your needs.
10) Battery Status
When you connect the power cable, you can check battery charge (even without
switching the unit on) basing on how many of the four LEDs are on. When charge level
is below 25%, the red LED flashes and indicates that you need to re charge the battery
as soon as possible.
11) AC Adapter Connection
Connect the device to the supplied power adapter, and then to a mains outlet. Be sure
that mains voltage corresponds to the adapter input voltage (within 110-240VAC).
12) Power Switch
Switch up to turn the speaker on, and switch down to turn it off. Make sure the level
control is down before you turn it on.
3. AUDIO CONNECTIONS
You will need several cables for the various connections to and from the speaker. See
the pictures below that show the internal wiring of these cables. Be sure to use only
high quality cables.
You can, of course, also connect unbalanced equipment to balanced inputs. Use either
mono and stereo jack, making sure ring and collar are connected together (or pins 1 &
3 in the case of XLR connectors).