SoundPeats TrueAir2 Скачать руководство пользователя

Страница: 1 / 11

English

Specifications

Bluetooth Version
Bluetooth Chip
Maximum Working Range
Play Time
Earbuds Charging Time
Case Charging Time
Charging Case Recharge Earbuds
Earbud Dimension

Bluetooth 5.2
Qualcomm® QCC3040
33 feet / 10m (no obstacle)
5 hours (volume at 60%)
1.5 hours
1.5 hours
4 times
1.54*0.70*0.64 in / 39.2*17.7*16.2 mm

Charge

Charge the earbuds

3.SOUNDPEATS TrueAir2 earbuds can remember previously paired device. To

reconnect to one device, you only need to activate the Bluetooth in the
device and take out both earbuds, the earbuds will automatically connect
to each other, and then pair to the device. If they don’t re-pair automatical-
ly, please choose the pairing name to connect again.

4.Mono mode: TrueAir2 earbuds support working with either earbud only after

successfully connected.

English

Power On

Power Off

Play / Pause

Volume -

Previous Track
Next Track

Answer / Hang Up Phone
Call

Reject Phone Call

Switch Between Two Calls

Manually Enter Pairing
Mode

Activate Voice Assistant

Auto:

Take out from charging case

Manually: Press and hold the MFB for 1.5s
Auto:

Place back into charging case

Manually: Press and hold the MFB for 10s
Double tap the MFB
Single tap the left MFB
Single tap the right MFB
Press and hold left MFB for 1.5s
Press and hold right MFB for 1.5s
Double tap the touch button

Press and hold the MFB for 1.5s
Press and hold the MFB for 2s
Press and hold the MFB for 6s

Triple tap the MFB

Button Control

Factory Reset

(Try the following steps if you fail building connection between two earbuds, or
between earbuds and device.)
1.Clear the pairing record between the earbuds and all your devices.
2.Place back both earbuds and make sure they are in charging status. Press

and hold both MFBs for 10 seconds until both indicators flash in white twice.

1.Place back the earbuds in right charging slots

and make sure the contactors connect.

2.Charging starts with red indicators staying on,

and ends with red indicators going out.

SOUNDPEATS TrueAir2 earbuds are provided with a charging case for easy carrying
and charging. It can recharge both earbuds for around 4 times.

English

SOUNDPEATS TrueAir2 说明书七国简版
材质：封面封底100克书纸内页80克书纸尺寸：90 x 84 mm

Pairing

1.Take both earbuds out of the charging case while the case is with enough

power left, the left and right earbuds will pair to each other at first with a
prompt suggests successfully connected. After this, the left indicator will turn
white, and right indicator flashes in red and white alternately with a voice
prompt “Pairing” indicating the earbuds enter pairing mode.

2.Activate the Bluetooth on your device and choose "SOUNDPEATS TrueAir2" to

connect. The right indicator will stop flashing with a voice prompt "Connect-
ed".

1. Identify the left and right earbuds.

2. Rotate earbuds to find most

comfortable angle.

Wearing

Getting Started

Product Diagram

Package Content

Charge the case

The charging indicators don’t stay on red after
placing back the earbuds, please charge the
case then.
1.Use a Type-C adapter to charge the case

(current not over 1A). The LEDs stay on red
while charging, and go out after fully
charged.

2.Please charge the earbuds and case at least

once per 3 months when not in use for a long
time.

We warrant this product to be free from manufacturing defect for 12 MONTHS.

[email protected]

www.soundpeatsaudio.com

Please scan the QR code or search the link below for detailed PDF manual.

Warranty Regulations

https://soundpeatsaudio.com/downloads/

1.5s

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifcations not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.

FCC Statement

Qualcomm

Qualcomm aptX, Qualcomm TrueWireless and Qualcomm cVc are products of Qualcomm
Technologies, Inc. and/or its subsidiaries.
Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated, registered
in the United States and other countries.

TrueAir2

TrueAir2

USER MANUAL

Manuel d'Utilisation

Bedienungsanleitung

Manual de Instrucciones

Manuale di istruzioni

取扱説明書 |

说明书

Room 1308-1309, Building B, Huihai Square, Chuangye Road,
Longhua District, Shenzhen, China. 518109
[email protected]
www.soundpeatsaudio.com

MANUFACTURER

Shenzhen SoundSOUL Information Technology Company Limited