SoundMax SM-CCR3703G, Инструкция по эксплуатации, Страница: 18 / 53

18
Radio operations
Band select
In Radio mode press the BAND button onscreen to choose among the five radio bands - three FM Bands
(FM1, FM2, and FM3) and two AM Bands (AM1, and AM2). Each of the five bands can store up to six preset
stations, for a total of 30 preset memory stations.
Auto/Manual tuning
• Automatic tuning: In Radio mode, touch and hold PREVIOUS or NEXT button to adjust the radio
frequency automatically. The radio will seek to the next or previous strong and clear frequency station
automatically. Repeat this action to seek for other desired stations. To stop automatic search, press one of
these buttons. Or press repeatedly shortly or button on the RC to manually adjust the radio frequency.
• Manual tuning: Press repeatedly shortly or button on the RC to manually adjust the radio frequency.
Automatic store/preset scan
There are six numbered preset buttons on the the screen (P1-P6) which can store and recall stations for
each band. While listening to a radio station you would like to save as a preset, touch and hold any key from
P1-P6 until you hear a beep. The station will be saved in the designated number.
Mono/Stereo control (in FM radio mode)
In FM radio mode, touch the ST button to select stereo or mono reception. ST ON means stereo reception of
the signal; ST OFF means mono reception mode. Improvement of reception of distant stations can be done by
selecting mono mode, which may cut down some reception noise.