SCD5100 / English Instruction Manual
1
Location of Controls
Main Unit
Top View
Rear View
1. REPEAT 8. SPEAKERS 15. FM RADIO STEREO SELECTOR
2. STOP 9. CASSETTE DOOR 16. TUNING CONTROL
3. SKIP- 10. FM ANTENNA 17. TAPE BUTTON
4. LED DISPLAY 11. HANDLE 18. HEADPHONE JACK
5. PROGRAM 12. FUNCTION SELECTOR 19. AUX-IN JACK
6. PLAY / PAUSE 13. CD DOOR 20. AC SOCKET
7. SKIP+ 14. VOLUME CONTROL
Installation
Select a suitable location for the device, such as a dry, flat, non-slip surface on which it is easy to operate
the machine.
Ensure that the device is sufficiently ventilated.
Remove the protective film from the display if it is still present.
Power Supply
Ensure that the voltage is the same as that indicated on the model identification plate.
Connect the power cable supplied (see battery compartment if necessary) to a properly installed safety
power socket and the mains connector AC on the back of the machine.
Inserting the Batteries
(not supplied)
1. Open the lid of the battery compartment.
2. Insert 6 batteries of type UM-
2 (“C” size) 1.5 V. Please ensure that the polarity is correct (see the floor of
the battery compartment)
3. Then close the battery lid.