IR4400 / English Instruction Manual
15
DAB
DAB mode receives DAB or DAB plus digital radio signal and
displays information about the station, streaming audio and the
programme details.
Scanning for stations
To start a scan manually, choose Full scan. To scan only stations with good signal strength,
select Local scan.
Once the scan is complete, the radio shows a list of available stations.
To remove stations that are listed but not unavailable, choose Prune invalid.
Turn the navigate reel to view a list of stations and press to select. Once selected, the station
plays and the screen shows information about station, track or show as broadcast.
Presets
To store an DAB radio preset, press and hold the Preset button until the display shows the Save
preset screen. Select one of the 40 presets to save the current station.
To select a preset, press the Preset button briefly, then select one of the listed preset
stations. The screen will show the corresponding preset number at the bottom center.
You can store / recall up to 40 of your favourite stations to the memory. This will enable you to
access your favourite stations 1- 5 quickly and easily by using the numeric buttons on the panel,
or the list of preset stations in UNDOK app.
The first time you select DAB radio mode, or if the station list is
empty, IR4400 automatically performs a full scan to see what
stations are available. You may also need to start a scan manually
to update the list of stations for one of the following reasons:
Available stations change from time to time.
If reception was not good for the original scan, this may
result in an empty or incomplete list of available stations.
If you have poor reception of some stations (burbling), you
may wish to list only stations with good signal strength.
