IR4400 / English Instruction Manual
5
SETUP WIZARD
Choose languages as your preference
1.
Time/date Display format
2.
Select 12 or 24 as the time format.
Auto update
3.
The time and date can be updated manually or automatically from DAB, FM or
network.
Auto update works with data sent over DAB, FM or the Internet. The clock is only
updated when it is in a corresponding mode, so it is suggested to select a mode you
use regularly.
DAB and FM use time signals broadcast with radio transmissions. Network uses a
time signal sent from the Internet radio portal when in any network connected mode.
Time zone/daylight
4.
Set your time zone. If your country uses daylight saving and it is in effect, turn on the
Daylight saving option.
Manual update
5.
If you set No update, the wizard prompts you to set the time and date manually. The
date and time are displayed as dd-mm-yyyy and hh:mm.
The active value appears as flashing. Adjust each value with the Tuning / Select /
Snooze knob. Once the value is set, press the knob to continue setting with next
value.
Network
6.
Keep Network connected
Select this option when the unit should the network connection in standby keep,
when the function is confirmed, the unit wills faster connecting the internet and it is
po
ssible to switch on the unit with the “UNDOK” app.
Note:
The standby power consumption is slightly increased with this function.
WLAN region
Select the WLAN region to obtain the optimal WLAN connectivity: Europe.
Scanning for the network
IR4400 is compatible with all common network protocols and encryption methods. It
searches for the available networks and list them out for you.
There will be hints for the type of network
– if your network devices support WPS
function, it will be
[WPS]
before the SSID (the name of the network device). Select
the one you want to connect.
