DAB970
/ English Instruction Manual
6
BASIC OPERATIONS
Power ON/OFF
Press the
“ ” knob on the unit or the “ ” button on the remote control to turn the unit on.
Press again
the “ ” knob or the “ ” button on the remote control to turn the unit off.
Selecting modes
During on mode, p
ress the “ ” button on the unit repeatedly to switch between the modes or
press the desired function on the remote control.
Adjusting the volume
Rotate the “
VOLUME
“ knob on the unit or press the “
V +/-
“ button on the remote control to
decrease or increase the volume.
NOTE:
If you adjust the volume above 26, then power off and power on again, the volume will restore to
the factory setting automatically.
Mute
During playing mode
, press the “ ” button on the remote control, the sound will not be heard
from the speaker.
Press the “ ” button again, the “
V +/-
“ button on the remote control or rotate the “
VOLUME
”
knob to cancel the mute function. The sound can be heard from the speakers again .
DAB
The first time you use the unit, or if the station list is empty, the radio automatically
performs a full scan to see what stations are available. You may also need to start a
scan manually to update the list of stations for one of the following reasons:
New stations may become available from time to time.
Stations close or can no longer be received (In the station list, invalid stations are
indicated with a question mark in front of their name).
If reception was not good after the original scan (for example the antenna was not up),
this may result in an empty or incomplete list of available stations.
If you have poor reception of some stations causing the audio to break up, you may
wish to list only stations with good signal strength.
Pres
s the “ “ button repeatedly on the unit or press the “
DAB
” button on the remote control
until “DAB” is displayed to select the DAB function.
Full Scan
Press the “
MENU
” button, select with the “ / ” buttons the function “Full scan” and press the
“
OK
” button to confirm. The unit starts a complete scan. Once a scan is complete, the radio
returns to playing the previously selected station or first station on the station list.
Selecting stations
1. Use the
“ / ” button on the remote control or rotate the “
NAVIGATE
” button on
the unit to scroll through the list of station.
2. Press
“
OK
” on the remote control or on the unit to change station.
