DAB750 / English Instruction Manual
2
Power control
Using AC power
Connect the power adaptor to the DC 9V socket on the unit.
S
lide the power switch to “ON” position then press the STANDBY button.
The display will light up and the unit will switch on.
To turn the unit in STANDBY mode:
Press the STANDBY button. The clock will continue to run whilst power switch at
the ON position.
Using battery power
Charging the battery
Slide the power switch to “OFF” position.
Connect the power adaptor to the DC 9V socket to the unit, than the wall power
socket.
The charging LED indicator will light up in RED color.
Slide the power switch to “ON” position then press the STANDBY button.
The display will light and the unit will switch on.
Press the STANDBY button To turn the unit in STANDBY mode:
ENERGY SAVING/ ERP2 REGULATION
This device is equipped with an AUTOMATIC SWITCH OFF / STANDBY SYSTEM
for energy-saving requirements. This is regulated by an EU-standard and is
NOT A MALFUNCTION.
Adjust the volume
To adjust the volume from the top panel controls:
Press the
“VOL -/+”
button to increase or decrease the volume level.
Select a preset EQ sound effect
During play, press
“EQ” button repeatedly to select:
[CLASSIC] [POP] [ROCK] [JAZZ] [Normal]
Clock setup
SET TIME/DATE: This main option enables the clock to be set manually if these is no
available DAB transmission.
To set the time and data manually:
In DAB or FM mode, press
“MENU” button to access menu.
1.
Press
“TUNE +/-“ to scroll the menu options:
2.
[System]
System [Clock Setup]
Set the Clock setup to Manual ( Defaulted at Radio )
3.
Press
“TUNE +/-“ to set the clock
4.
To select an option, press
“SELECT” button
5.
