Soundmachines NS1nanosynth, Руководство пользователя

Страница: 2 / 25

IMPORTANT INFORMATION: Care and Feeding:
Please be aware that only 5V power supplies are allowed . We have protections on the device DC
jack but it won't resist indefinitely against higher voltages!!!
If you didn't purchase the bottom cover, please avoid touching the electronics on the bottom layer
of the PCB with your hands and avoid the contact of the bottom side with metallic or conductive
object that could be on your desk (pens, jacks, nail trimmers...) as it can cause a destructive short
circuit.
Those are really basic indications for the people that are used to Arduinos and similar products
(that tipically 'exposes' the circuits and components to the user) but could be less known to a
musician or a curious guy like yourself.
Do not connect the unit directly with devices (other modular products) that could source voltages
greater than 5V signals without external protection. This can lead to malfunctions and eventually
break some parts on the NS1nanosynth.
Please consider the usage of the NSbridge, our own small adaptation board, when planning to
connect to eurorack modules. The NSbridge have integral protection that should cover all the
inadvertent application of out of range signals! On this board there are protection for voltages
greater than 5V and negative voltages.
The patching points on the top side of the board are obviously safe to use and there are no
potential damages when you are patching. Take some time with this manual as the universal
advices like "don't connect an output to another output" still does apply!
Power Supply Specification:
•
5VDC regulated
•
200mA supply current (1W)