Soundmachines NS1nanosynth, Руководство пользователя

Страница: 16 / 25

You can also implement button driven 'rolls' on the melodic lines et... With the optional
involvement of the Arduino platform this could lead to complex sequencing like euclidean
rhythms and rhythmic arpeggiators... The NS1nanosynth includes two NOT gates
(inverters), one AND, one OR and one NAND port, each of those freely connectable.
Manual Controls: NONE. Input/Output: inputs and
outputs to the various logic gates are indicated by
entering and exiting arrows on the connector pins.
Tech Specs: Buffered CMOS integrated circuits are
used on this part of the circuit. Please have a look at
the datasheets of this family to learn more.
•
CKDIV (clock divider):
The clock divider section of the NS1nanosynth comprises a standard cmos ic that divides
the frequency of the incoming digital signal from /2 up to /64. The RES (reset input) allows
to restart the internal counter. This block could be used to generate sub-­‐oscillations from a
VCO, output triggers that will be likely processed with logic gates etc...
Manual Controls: NONE.
Input/Output: as described above.
Tech Specs: NONE.
•
CVDIV (voltage divider):
The NS1nanosynth have two variable passive attenuators. To put in place another one of
those really useful modules we implemented a fixed voltage divider (attenuator) that will
allow the user to obtain a fixed attenuation of 2/3 1/2 and 1/3 of the orginal signal. As the
voltage divider is made with resistors, the consideration on impedance will apply. Again,
this will not disrupt you synth but it may held different results from what you expect.
Manual Controls: NONE.
Input/Output: There is one CV or AUDIO input
marked with an ingoing arrow and three outputs
at the various attenuation 'taps'.
Tech Specs: this module is actually a resistor
network and you can basically use concurrently all
the outputs!