Operation
Notes
1
．
Keep stains, watermarks away from the hearing aids before
drying.
2
．
Remove battery from hearing aids before drying.
3
．
Make sure hearing aids clean and no battery leakage before
drying.
4
．
Power specifications must be strictly observed with our
instructions to avoid serious consequences such as halting
problem or even burnt of machine.
5
．
Do not cover the machine when it is working.
6
．
The drying time must be less than 12 hours per day.
Notes:
+86 512-69372012
372012
AID202
Electronic Dryer
User Manual
Note:
1. Must turn off the power before checking the board inspection.
2. Repairing must be performed by professionals.
Common troubleshooting
Packing list
1.The power adapter
and socket are not
plugged well.
2.The power adapter
and USB cable are
not plugged well.
3.The power cord is
not plugged well or
the power button on
the power strip is
not turned on.
1.If power-on, the 4
indicators do not
flash
2.If press time
setting button are
not on
3.If press
temperature
setting buttonare
not on
Cause Analysis
Symptom
Solution
AID202
AID202
AID202
5.0V/1.0A
USB to DC3.5*1.35
Certificate
Instruction manual
With instruction
manual
Packing List
Power Adapter
Adapter charging cable
Item
Model
Quantity Remarks
No
No
1
1
1
1
1
1meter
1
2
3
4
5
Remarks
1.Re-plug the power
adapter and socket
2.Re-plug the power
adapter and USB
cable
3.Re-plug the power
strip and make
sure the power
button is turned on
Board
inspection
and
repairing
should be
performed
by
profession
als
Temperature :
Press the thermostat selection button to select 40
℃
and 50
℃
. The default temperature is 40
℃
, so the red indicator light
at 40
℃
is always on . If need 50
℃
, continue to press the thermostat
selection button again. The 50
℃
green indicator light is always on,
and the 40
℃
green light is off. Switch between 40
℃
and 50
℃
.
Ending
：
The machine will stop heating automatically when the
setting time is reached. Accordingly, the corresponding heating
indicator red light turns off, and the corresponding timing green light
flashes at the same time. The drying process is finished and hearing
aids should be removed from the dryer.
Brush with loop & magnet :
The loop is used to remove foreign
matter in the tube . The magnet is used to remove the battery from the
hearing aid or load the battery to the hearing aid. The brush is used to
clean the surface of the hearing aid .
Two battery placement:
The magnetic suction force of the area
is used to suck the battery to avoid the loss of the battery drop.
7
．
Please pull out the plug after drying.
8
．
Do not try to disassemble or repair the machine by yourselves.
9
．
Keep away from children.
