SoundCraft SPIRIT POWERSTATION, Руководство пользователя

Страница: 30 / 37

CARE OF YOUR MIXER
General Precautions
Avoid storing or using the mixer in conditions of excessive
heat or cold, or in positions where it is likely to be subject to
vibration, dust or moisture.
Keep the mixer clean using a soft dry brush, and an occasional
wipe with a damp cloth or ethyl alcohol. Do not use any
other solvents which may cause damage to paint or plastic
parts.
Avoid placing drinks or smoking materials on or near the
mixer. Sticky drinks and cigarette ash are frequent causes of
damage to faders and switches.
WARNING: To reduce the risk of fire or electric shock,
do not expose this unit to rain or moisture.
Regular care and inspection will be rewarded by a long life
and maximum reliability.
Glossary
auxiliary send an output from the console comprising a mix of signals from
channels and groups derived independently of the main
stereo/group mixes. Typically the feeds to the mix are
implemented on rotary level controls.
balance the relative levels of the left and right channels of a
stereo signal.
clipping the onset of severe distortion in the signal path, usually
caused by the peak signal voltage being limited by the
circuit’s power supply voltage.
dB (decibel) a ratio of two voltages or signal levels, expressed by the
equation dB=20Log
10
(V1/V2). Adding the suffix ’u’ denotes
the ratio is relative to 0.775V RMS.
Page 29