SoundCraft SPIRIT POWERSTATION, Руководство пользователя

Страница: 18 / 37

MASTER SECTION
1 EFFECTS MASTER FADER
The EFFECTS linear fader controls the level of the stereo
output signal of the on-board Lexicon Digital Effects
Processor, which feeds directly to the Left/Right mix, and is
subject to the control of the Main L/R Master Faders (see 2
below).
2 MAIN LEFT & RIGHT MASTER FADERS
The MAIN L & R MASTER FADERS control the final output
level of the signal to the Main impedance balanced outputs,
after the Insert Point.
3 AUX 1 PRE
Aux Send 1 is normally post-fade, but for flexibility it may be
switched to PRE-FADE by pressing the AUX 1 PRE switch.
This simultaneously affects all Aux 1 sends across the mixer.
4 EFFECTS TO AUX 1
The EFFECTS TO AUX 1 control allows the output of the
Lexicon Digital Effects Processor to be mixed in mono with
the Aux 1 Sends if required to provide a ‘wet’ foldback feed or
alternative output.
5 AUX 1 MASTER
The AUX 1 MASTER control sets the final level of the Aux 1
mix to the impedance balanced Aux 1 output.
6 AUX 2 MASTER
The AUX 2 MASTER control sets the final level of the Aux 2
mix to the impedance balanced Aux 2 output.
7 STEREO RETURN
The unbalanced Stereo Return, at a nominal -10dBV, feeds via
the STEREO RETURN control to the Main L/R mix, before the
L/R Master faders. If a mono source is to be used, plugging
into the Left jack automatically feeds the signal equally to
both sides of the Return.
Page 17