Each iCast Transmitter can also operate up to two iCast
Receivers, two OutCast units or one of each. This means
you can purchase iCast receivers or another OutCast from
your retailer and transmit audio to two different locations in
your house. All operating functions remain the same when
both receivers are in operation.
Receiver upstairs
Receiver downstairs
The Channel selector switch will also allow you to
eliminate the signal from a neighbor’s Soundcast
system. If you live in an apartment building and
fi nd that you receive music from another Soundcast
system, simply move the selector switches on your
Soundcast Transmitter and
Out
Cast to a different
Channel and the unwanted signal will stop being
received.
Should you have any additional questions concerning
the installation or use of your Soundcast products,
please contact Soundcast via E-mail at
.
7
Channel selector, 1, 2, or 3
Channel selector, 1, 2, or 3
Channel selector, 1, 2, or 3
It is also possible to operate two entirely
different Soundcast systems in the same
household if you wish. Two transmitters
can operate within the same 45 meter
(150 foot) radius by using the channel
selector switch on the back of the unit.
All Soundcast products come from the
factory with Channel 1 selected. On the
back of each Soundcast unit there is a 3
position selector switch to allow the user
to select different transmission channels.
On OutCast the switch is under the
rubber cover on the side of the unit.
When you wish to use two Soundcast
systems at the same time, leave one
system on Channel 1 and move the
selector switch to on the second system
to Channel 2 or 3. Please remember that
both the Transmitter and
Out
Cast
must set on the same Channel. When
set this way, the two systems will not
confl ict with each other and you can
use two different iPods operating two
different audio systems in the same
house.
Содержание OutCast
Страница 1: ...OUTCAST OWNER S MANUAL With iCast...
