Product info SPX Series
- 5 -
Using the SPX Mounting Bracket
The SPX mounting bracket is designed for use with a single cabinet when using the middle
fixing hole or 2 cabinets when using the two outer fixing holes.
When used in static fixed installation situations, where no overhead situations are present the
bracket can be used for up to 4 cabinets (using the 2 outer fixing holes).
All items for cabinet fixture are included. Various ways to connect the bracket to wall, ceiling or
construction are applicable. Items for this purpose are optional.
Step 1
When using a clamp or other device
connect the clamp to the bracket. Connect
safety slings to the left and right hole on top
of the bracket if deemed necessary.
Step 2
Once the mounting bracket is prepared for
its intended purpose, the cabinet may be
fixed to the bracket using the Quick Release
Pins. There are three angles possible:
parallel to bracket or tilted 10 or 15 degrees
downwards.
Step 3
ONLY applicable when using two or more
fixing holes!
Connect a second cabinet by means of two
connector plates and 8 quick release pins.
