Remote Control Func ons Only
To program MP3 tracks on USB key or Card.
1. Insert USB key or Card. Press
PROG
bu on to enter
program mode.
2. Press the
I SKIP I
bu ons to select folder. Press
PROG
bu on again followed by
I SKIP
I
bu ons for
desired track
followed by
PROG
bu on. Repeat un l all
tracks are programmed.
3. To play programed tracks, press
PLAY
bu on.
(
NOTE:
to return to normal play mode from program
mode, press
STOP
bu on followed by
PLAY
bu on. To
return back to program mode press
STOP
bu on fol-
lowed by
PROG
bu on followed by
PLAY
bu on)
4. To clear programmed tracks, press
PROG
bu on fol-
lowed by
STOP
bu on
.
(
NOTE:
Programed tracks will be erased upon power off
of the BlueTooth player)
INTRO bu on
Press
INTRO
bu on to play fi rst 10 seconds of track, then automa cally skip to next
track. Press
I
Play bu on to turn off
INTRO
ID3 bu on
Press
ID3
bu on to display the tle, ar st, or album on upper display line. Tracks
without this program informa on may display nothing.
560-0037 Rev 5 OPT-500 06/19
www.soundprojec ons.com
4
While track is playing, press the
A-B
bu on once at the beginning of the por on you
want to select (B will begin fl ashing in the display). Press the
A-B
bu on again to
select the end of the sec on you wish to playback. The selected sec on will then
play repeatedly. To return to normal play, press the
A-B
bu on again.
A-B Mode
(use to select a por on of a track to playback repeatedly)
IR remote can only be controlled when standing behind speaker facing BT unit
Volume Control
VOL
bu ons will control volume of BT/USB player from 0-30.
NOTE:
Factory preset (recommended) volume is set at 30,
with all adjustments done with BT/USB Volume on rear panel.
All Func ons below work with USB or SD card ONLY.
User Guide
For OPT-500 BT/MP3 Player
1
