Program Play
1. Insert CD. Press
PROG
bu on to enter program mode.
2. Enter selected track by using the
I
SKIP I
bu ons followed by
PROG
but-
ton. Repeat un l all tracks are programmed.
(
NOTE:
When using the remote control for programming, selected tracks may be entered
directly by using the 0 through 9 numbers on the remote control keypad).
3. To play programed tracks, press
PLAY
bu on.
(
NOTE:
To return to normal play mode from program mode, press
STOP
bu on
followed by
PLAY
bu on. To return back to program mode press
STOP
bu on
followed by
PROG
bu on followed by
PLAY
bu on)
4. To clear programmed tracks, press
PROG
bu on followed by
STOP
bu on.
(
NOTE:
Programed tracks will be erased upon power off of the CD player)
To program tracks on CD (not MP3)
To program MP3 tracks on CD or USB key
1. Insert CD or USB key. Press
PROG
bu on to enter program mode.
2. Press the
I SKIP I
bu ons to select folder. Press
PROG
bu on again fol-
lowed by
I SKIP
I
bu ons for desired track
followed by
PROG
bu on.
Repeat un l all tracks are programmed.
3. To play programed tracks, press
PLAY
bu on.
(
NOTE:
to return to normal play mode from program mode, press
STOP
bu on
followed by
PLAY
bu on. To return back to program mode press
STOP
bu on
followed by
PROG
bu on followed by
PLAY
bu on)
4. To clear programmed tracks, press
PROG
bu on followed by
STOP
bu on
.
(
NOTE:
Programed tracks will be erased upon power off of the CD player)
ESP bu on (Electronic Shock Protec on,
APPLIES TO
CD ONLY
)
The
ESP
bu on turns Electronic Shock Protec on off /on. ESP on is default.
(
NOTE:
Recommend to Always leave ESP set to “on”)
ID3 bu on
(on remote control only)
Press
ID3
bu on to display the tle, ar st, or album on upper display line. Tracks
without this program informa on may display nothing.
560-0031 Rev A opt-101 02/2013
www.soundprojec ons.com
4
User Guide
For OPT-101 CD/MP3-USB Player
1