background image

6

Transducer

The scope of delivery comprises the Transducer, the power cable and the manual. Please keep 
the original packaging. In case of a service procedure the original packaging ensures a safe 
transport. It also serves as a safe packaging for your own transports if you do not use special 
transportation cases.

Tonehunter and SPL

The Transducer is a cooperative developmental effort between the guitar amp fi rm  of 
Tonehunter and SPL. It brings together many years of experience from the professional music 
scene, combining specialized knowledge of electric guitarists and SPL‘s established interna-
tional reputation in the research and development of analog studio electronics. This mutual 
effort of these two fi rms has been the basis for new ideas such as the unique Transducer 
concept, which has the potential to revolutionize the working life of both the electric guitarist 
and the recording studio engineer.

Tonehunter

The fi rm Tonehunter has over 15 years of experience pursuing the goal of fulfi lling the sonic 
wishes of professional electric guitarists. This includes tube amplifi ers, effects units, support 
for  live  and  studio  sessions  as  well  as  custom  set  designs  from  instruments,  cables  and 
effects machines to pickups, amps and speaker cabinets. The Tonehunter team is comprised 
exclusively of musicians with extensive audio engineering backgrounds who, in contact with 
their customers, are always at the forefront of new, no-compromise developments that fulfi ll 
the highest user expectations.

SPL – Sound Performance Lab

SPL  boasts  over  20  years  of  experience  in  the  development  and  production  of  analog  and 
digital audio processing equipment in the professional music, fi lm, multimedia and broad-
casting industries. Our products enjoy a fi rst rank, worldwide reputation for innovation, user 
friendliness and consistently superior performance. 

To SPL’s technological milestones belong the fi rst level-independent analog dynamic enve-
lope shaping tool (the “Transient Designer”), the pioneering introduction in 1998 of the fi rst 
discrete 5.1 surround recording system (“Atmos 5.1“) and the development of the SPL SUPRA 
OpAmps with an unprecedented operating voltage of 120 Volts. These SUPRA OpAmps form 
the basis for SPL‘s Mastering Series for stereo and multi-channel applications and with their 
performance set new benchmarks in audio signal processing that are clearly a step beyond all 
existing analog or digital audio formats.

Transducer

The SPL Transducer is an analog cabinet and miking simulator for guitar amplifi ers. In studio 
and on stage the Transducer replaces the guitar speaker cabinet and microphone(s) so that 
the time and resource-intensive microphone processing of this loud sonic source is no longer 
necessary. In addition the Transducer offers much more sonic fl exibility and variety than a 
single mike and cabinet setup because it allows for varied speaker and mike simulations 
while allowing to retain accustomed features of individual setups (such as the ability to vary 
level-dependent loudspeaker characteristics and microphone distances). 

Do you want to record a fully torqued tube amp in a hotel at night? You’ll stay: with head-
phones virtually inaudible to anyone else, soundwise with stunning authenticity, and with 
the direct response of latency-free analog gear. The Transducer‘s purely analog design and 
strictly selected components are the key to its extremely fast and complex sonic processing 
– latency problems simply do not exist! It thereby gives the guitarist a direct response with an 
authentic punch. The analog simulation is so lavishly designed and constructed that even the 
most subtle guitar amp nuances are reproduced. With just a few adjustments the engineer 
has at his or her disposal a fi rst class guitar signal for either studio recording sessions or in a 
live P. A. mix.

Scope of Delivery

 

Introduction

Содержание Model 2601





























Отзывы: