Sound Devices PIX 250i, Руководство пользователя и техническая информация

Страница: 36 / 84

PIX 250i User Guide and Technical Information
v. 2.00 Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.
30
Pla
ybac
k
Looping Playback
Looping playback can be enabled for a segment or the entire clip. To toggle looping playback and
begin looping the entire currently playing clip, hold the Play (  ) but-
ton for 1 second.
Loop: Clip
will be displayed in the bottom left-hand
corner of the OSD if
[On-Screen Display - Cue Marker]
is set to On.
Loop: Clip
will be followed by
/ Cue number
when playback is within a
segment (where number is the number of the last cue marker).
To loop a segment, press Play (  ) Fast Forward ( >> ) but-
ton while playback is in that segment. The cue markers that are being
looped between are displayed on the bottom left-hand corner of the
OSD. To return to looping the entire clip, press Play (  ) Re-
wind ( << ) button.
To exit looping, hold down the Play (  ) button for 1 second.
Playback Mode
By default, when a file is selected for playback, the PIX 250i will play the file immedi-
ately and stop playback when the end of the file is reached. The Setup Menu options
[System - Playback Start mode]
and
[System - Playback mode]
alter this behavior. When
[System - Playback Start mode]
is set to
Pause on First Frame
, a file will begin playback in a paused
state on the first frame. This is useful for “loading” a clip so that playback can be manually triggered
without any start up delay.
The Setup Menu option
[System - Playback mode]
affects how playback will continue after the end
of a file is reached (assuming no user transport commands are called):
Playback mode Behavior
Play Once Playback stops when the end of the file is reached.
Play Once - Pause Playback pauses on last frame when the end of the file is reached.
Play All Playback continues with the next file in the File List. This process is repeated until all files in
the File List have been played at which point playback stops.
Play All - Pause Playback pauses at the first frame of the next file. This process is repeated until all files in
the File List have been played or Stop is pressed.
Play All - Loop Playback continues with the next file in the File List. This process is repeated until all files
in the File List have been played at which point playback begins at the beginning of the File
List.
Play List Playback continues with the next file in the Play List. This process is repeated until all files in
the Play List have been played at which point playback stops.
Play List - Pause Playback pauses at the first frame of the next file in the Play List. This process is repeated
until all files in the Play List have been played or Stopped is pressed.
Play List - Loop Playback continues with the next file in the Play List. This process is repeated until all files
in the Play List have been played at which point playback begins at the beginning of the Play
List.
It is recommended that files in the same Play List or reel be of the same resolution, frame rate, and codec.
Looping entire clip
Looping a segment