Sound Devices PIX 250i Скачать руководство пользователя страница 29

Страница: 29 / 84

PIX 250i User Guide and Technical Information

Recor

ding

To discard the last take and delete the file (False take), press Stop (



) Rewind (

) button. A

dialog box will appear warning that the last take will be deleted and indicate the file name. Use the

Control Knob to highlight OK and push the Control Knob to confirm.

Selecting Video File Resolution and Frame Rate

The PIX 250i can record video in numerous resolutions and frame rates. The Setup Menu option

[Video - File Resolution/Rate]

sets the resolution and frame rate of recorded QuickTime files. This

Setup Menu option also determines the resolution and frame rate of the live HDMI and SDI output

signals, except during playback. The PIX 250i can record QuickTime files in the following resolutions

and frame rates:

• 1080p30

• 1080p29.97

• 1080p25

• 1080p24

• 1080p23.976

• 1080i60

• 1080i59.94

• 1080i50

• 1080PsF30

• 1080PsF29.97

• 1080PsF25

• 1080PsF24

• 1080PsF23.976

• 720p60

• 720p59.94

• 720p50

• 720p30

• 720p29.97

• 720p25

• 720p24

• 720p23.976

• 576i50 *

• 480i59.94 *

When Setup Menu option

[Video - File Resolution/Rate]

is set to

Same as Video Input

, recorded

QuickTime files and video output signals will be of the same resolution and frame rate as the input

video signal.

* Standard definition recording is only available for ProRes 422 HQ, ProRes 422, and ProRes 422 Proxy.

Progressive Segmented Frames (PsF)

Some cameras output video signal in progressive segmented frames (PsF). PsF is a method for

transmitting progressive video in an interlaced stream. A device generates PsF signal by splitting

each frame into two segments. PsF segments are the same as interlaced fields in that one segment

represents the even lines of a frame and the other segment represents the odd lines of a frame. PsF

segments differ from interlaced fields in that there is no motion between each segment in a pair.

The PIX 250i will automatically sense PsF signal from most cameras that output PsF over SDI. This

is accomplished through the use of a flag inserted into the SDI signal by the camera. If a camera does

not insert this flag into the SDI stream or if it outputs PsF signal over HDMI, then the Setup Menu

option

[Video - Input PsF Detect]

can be set to

Interpret 1080i as PsF

. This will force the PIX 250i to

treat all 1080i signal as if it were PsF and deinterlace it accordingly.

Selecting a Video Codec

Setup Menu option:

[Video - Codec]

The PIX 250i has two families of intra-frame, DCT based codecs available: Apple ProRes and Avid

DNxHD, with five levels of compression for ProRes and four levels of data compression available for

DNxHD. Both codecs are intermediate codecs that assist the editing process by eliminating the need

to transcode video before importing into Final Cut (ProRes) or Avid (ProRes or DNxHD).

ProRes is a variable data rate codec; DNxHD is a fixed data rate codec. PIX 250i supports all com-

pression levels and bit rates of DNxHD and ProRes and automatically records the correct bit rate

dependent upon the video input resolutions and frame rate. The data rates indicated in the Setup

Menu item

[Video - Codec]

indicate the maximum data rate at 1080p30.

Содержание PIX 250i





















































































Результаты поиска

Содержание PIX 250i

Отзывы:

Бренды по названию

Популярные бренды

Sound Devices PIX 250i, Руководство пользователя и техническая информация

Результаты поиска

Содержание PIX 250i

Отзывы:

Бренды по названию

Популярные бренды