manualshive.com logo in svg

Sound Devices PIX 250i, Руководство пользователя и техническая информация

Поделиться
Скачать
Sound Devices PIX 250i Скачать руководство пользователя страница 11

PIX 250i User Guide and Technical Information

5

Panel Descr

ip

tions

PIX-CADDY 2 (Optional)

The PIX-CADDY 2 is an accessory to connect approved 2.5” drives to the front-panel drive bays. 

When removed from a PIX 250i, the PIX-CADDY 2 operates as a high-speed drive interface to Mac 

OS and Windows computers via the onboard FireWire800, USB 3.0, or the optional PIX-DOCK Thun-

derbolt interface.

For reliable operation, it is imperative that the 2.5” drive be firmly screwed to the PIX-CADDY 2 with 
the supplied screws. 

6

5

3

4

7

2

1

1) 

FireWire 800

 

FireWire 800 or 400 (backward compat-

ible). Requires a powered FireWire 800 or 

400 port. 

2) 

eSATAp

 

High-speed data transfer over 5V  

eSATAp. Requires a 5V powered eSATAp 

port. 

3) 

USB 3.0

 

High-speed data transfer over USB 3.0 

(backward compatible with USB 2.0).

4) 

2.5” Drive Slot

 

Connector for approved 2.5-inch SATA II 

and SATA III drives. Sound Devices main-

tains a list of tested and approved SSD 

drives for use with PIX video recorders. 

Visit 

www.sounddevices.com/approved

 for 

an up-to-date list of tested and approved 

drives.

5) 

Activity LED

 

Illuminates when recording, playing, 

reading, or writing to the attached 2.5” 

drive. Do not remove the caddy while the 

Activity LED is illuminated. 

LED does not 

illuminate when connected to a computer’s 
eSATA port.

6) 

Release Latches

 

Secures the PIX-CADDY to the recorder. 

Press both latches to remove the caddy 

assembly.

7) 

Screw Holes

 

For reliable operation, it is imperative that 

the 2.5” drive be firmly screwed to the 

PIX-CADDY 2 with the supplied screws.

Содержание PIX 250i





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды