Sound Devices CL-12, Руководство пользователя

Страница: 21 / 29

21
CL-12 LINEAR FADER CONTROLLER
i
When L and R are linked, L controls level for the L/R output pair. When X1 and X2
are linked, X1 controls level for both. Also, when linked, the R and X2 controls are
disabled. (Output linking control is in the OUTPUT menu.)
Configuring Output Meters (688 only)
On a 688, the LED output meters on the CL-12 may be configured to meter L,
R, X1, and X2 output or track levels. For other 6-Series mixers, the 22-segment
output metering on the CL-12 is always for track levels.
To configure CL-12 output meters:
1. Press MENU to access the 688’s Main menu.
2. Select CL-12 > L - X2 Metering.
3. Select one of two options: Meter Output Level or Meter Track Level.
Arming L, R, X1, X2 Tracks
With the CL-12, L, R, X1 and X2 may be armed for recording, or unarmed.
To arm L, R, X1, X2 tracks for recording:
1. Press and hold down the ARM button.
2. Press the rotary OUTPUT control(s) corresponding to the output track(s)
you want to arm.
When armed, each output track’s ARM LED illuminates red.
Using the 3-Band Equalizer (688 only)
The CL-12 adds 3-band EQ to the 688. EQ is only available when sample rate
is 48.048 kHz or less, and it is only available for adjustment when CL-12 is
connected.
• LF is a fixed 100 Hz EQ by default, with +/- 12 dB gain adjustment. The de -
fault may be altered via settings in the EQ submenu.
• MID provides variable EQ frequency adjustment over 400 Hz – 6k range
with +/- 12 dB gain adjustment.
• HF is a fixed 10 kHz EQ by default, with +/- 12 dB gain adjustment. The
default may be altered via settings in the EQ submenu.
i
When CL-12 is disconnected, the EQ settings are retained, but they cannot be ad -
justed. For more information, see Accessing the EQ Submenu .
To adjust EQ for a selected input, do any of the following:
X
Turn the LF encoder to adjust the selected input’s low frequency gain.
X
Turn the FREQ encoder to adjust the selected input’s MID frequency.