manualshive.com logo in svg

Sound Devices 664, Руководство пользователя

Поделиться
Скачать
Sound Devices 664 Скачать руководство пользователя страница 75

75

TIMECODE AND SYNC

To synchronize to an external word clock signal:

1.  Connect the word clock signal to the BNC input on the 664’s back panel.

2.  Press the MENU button. 
3.  Turn and press the Headphone encoder to select TIMECODE/SYNC > Sync 

Reference.

4. 
5.  Set the sync reference to Word Clock.

When the 664 is locked to external word clock, it is indicated by WCK in yellow 

text at the bottom of the Main screen. 

Wordclock value

If no valid external word clock is present, the word UNLOCK blinks yellow and 

red on the Main screen.

 

i

During playback, the 664 ignores any external word clock source and only uses its 

own internal word clock.

Setting Word Clock Sensitivity

A menu option is available on the 664 letting you adjust the sensitivity of the 

word clock input to allow the mixer to work with word clock sources of lower 

voltage amplitude. 

To set the sensitivity:

1.  Press the MENU button. 

2.  Select the Timecode/Sync > Word Clock Sensitivity. Options include: High 

(no termination) or Low (75 ohm termination). By default, sensitivity is set 

to High.

Содержание 664
























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды