Sound Devices 664 Скачать руководство пользователя страница 64

Страница: 64 / 183

User Guide

To lock the slate function on:

1. Slide the MIC/TONE switch left. The slate mic activates, the Slate/Tone LED

illuminates green, and the headphone monitor source changes to SLATE.

2. Slide the MIC/TONE switch left again. The slate mic deactivates, the Slate/

Tone LED turns off, and the headphone monitor reverts to its previous

source.

Private Communications

The 664 features an unbalanced stereo COM Send output (TA3 connector) and

a balanced mono COM RTN input (TA3 connector)—both on the back panel—for

private communication between the 664 operator and other members of the

production crew. The most common use of comms is for the sound mixer to

communicate directly with the boom operator. The same mic used for slate is

also used to send comms.

Activating Comms

On the 664, comms are sent to the COM Send output and right headphone out

put, but not to any other outputs.

Comms will never go to record tracks or affect recordings.

The following procedures describe default behavior of the MIC/TONE switch;

however, it may be modified to behave differently. See

Setting MIC/TONE and

A B/C Switches

for more information.

To activate private comms momentarily:

1. MIC: Press and hold the SELECT encoder while sliding and hold

ing the MIC/TONE switch left. The slate mic activates, and the Slate/Tone

LED illuminates green.

2. Release the MIC/TONE switch. The slate mic deactivates, and the Slate/

Tone LED turns off.

To lock Comms on:

1. MIC: Press and hold the SELECT encoder while sliding the MIC/

TONE switch left. The slate mic activates, and the Slate/Tone LED illumi

nates green.

2. Slide the MIC/TONE switch left again. The slate mic deactivates and the

Slate/Tone LED turns off.

Содержание 664
























































































































































































Результаты поиска

Содержание 664

Отзывы:

Похожие инструкции для 664

Бренды по названию

Популярные бренды

Sound Devices 664, Руководство пользователя

Результаты поиска

Содержание 664

Отзывы:

Похожие инструкции для 664

Бренды по названию

Популярные бренды