Sound Devices 664 Скачать руководство пользователя страница 38

Страница: 38 / 183

User Guide

Configuring PFL Mode

On the 664, the PFL switch has two modes for soloing input signal to headphone

monitors. By default, the mode is set to pre-fade. However, the PFL switch may

be configured so that soloing follows ISO track.

To set the PFL mode:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select INPUTS > PFL Mode.
3. Use the Headphone encoder to select a mode: PreFade or Follow ISOs.

Configuring Input to ISO Routing

By default, inputs 1-6 are routed to its associated ISO track pre-fade, in which

case the fader does not affect the signal on the ISO track. This routing can be

configured (on a per-input basis) to be post-fade, meaning the fader does affect

the signal on the ISO track.

To individually configure Input ISO Routing:

1. Access the Input Settings screen, using the corresponding PFL switch for

the input (1-6) you want to configure.

2. Press the Select encoder to select either ISO Prefade or ISO Postfade option.

Input to ISO Routing for inputs 1-6 also affects the pre- or post-fade status of

those inputs’ routing to AES digital tracks.

Configuring Input Mode for PFL

By default, access to PFL soloing and the Input Settings screen for inputs 1-6

can be achieved with one hand. This is called 6-Channel mode.

Solo (PFL) for inputs 1-6 while in 6-Channel mode:

Slide PFL switch left.

While soloing, PFL # will appear in the lower right corner of the LCD, next to the

headphone icon, with # being the number of the input. For instance, when solo

ing PFL for input 1, PFL 1 will appear on screen.

Simultaneous PFL of multiple inputs (1-6) is also possible by sliding one PFL switch

after another to the left. When multiple input PFLs are engaged, PFL MORT appears

in the lower right corner of the screen. Slide each switch again to deactivate.

Access inputs 1-6 Input Settings screens while in 6-Channel mode:

Slide PFL switch right.

Содержание 664
























































































































































































Результаты поиска

Содержание 664

Отзывы:

Похожие инструкции для 664

Бренды по названию

Популярные бренды

Sound Devices 664, Руководство пользователя

Результаты поиска

Содержание 664

Отзывы:

Похожие инструкции для 664

Бренды по названию

Популярные бренды