Sound Devices 664 Скачать руководство пользователя страница 167

Страница: 167 / 183

167

CL-12 LINEAR FADER CONTROLLER

When EQ is applied to a selected input, the EQ screen also appears for the

selected input on the mixer’s LCD. For instance, in the following example, EQ

is applied to channel 1 (CH-1); LF is set at 10 dB and HF is set to -10 dB, while

MID frequency and gain are bypassed. In the example, high-pass filtering is off,

the Q-factor is set to 1.0 and both LF and HF filtering is set to Peaking.

It is not possible to adjust EQ for multiple inputs at the same time. When

multiple input channels are selected, the channel that is adjusted will be the

last one added to the group.
There is a 10-second timeout on the EQ screen, if nothing is adjusted.

Press and hold an input’s SEL button while pressing any of the EQ encoders to view

the input’s EQ screen without changing the input’s EQ value.

Accessing the EQ Submenu

Several settings related to EQ—such as Q-factor, EQ routing, and so forth—may

be configured via the EQ submenu.

To access the EQ submenu:

1. Press MENU.

2. Select CL-12 > EQ. The EQ submenu appears.

Содержание 664
























































































































































































Результаты поиска

Содержание 664

Отзывы:

Бренды по названию

Популярные бренды

Sound Devices 664, Руководство пользователя

Результаты поиска

Содержание 664

Отзывы:

Бренды по названию

Популярные бренды