Sound Devices 664, Руководство пользователя

Страница: 165 / 183

165
CL-12 LINEAR FADER CONTROLLER
i
When L and R are linked, L controls level for the L/R output pair. When X1 and X2
are linked, X1 controls level for both. Also, when linked, the R and X2 controls are
disabled. (Output linking control is in the OUTPUT menu.)
Configuring Output Meters (688 only)
On a 688, the LED output meters on the CL-12 may be configured to meter L,
R, X1, and X2 output or track levels. For other 6-Series mixers, the 22-segment
output metering on the CL-12 is always for track levels.
To configure CL-12 output meters:
1. Press MENU to access the 688’s Main menu.
2. Select CL-12 > L - X2 Metering.
3. Select one of two options: Meter Output Level or Meter Track Level.
Disabling Output Controls
The 6-Series mixers, when attached to a CL-12, has a sub-menu option that lets
users disable the rotary output level controls for L,
R, X1, and X2 to avoid accidental changes in level.
To disable the output controls on the CL-12:
1. Press MENU.
2. Select CL-12 > L-X2 Gain Pots.
3. Select Off. This setting is On by default.
i
Even when disabled, users can still route to L, R, X1, and X2 by pressing in the
controls (pots). Also, disabling the CL-12 output level controls does not impact
controls on the mixer. Attenuation of output may still be achieved via the mixer.
Arming L, R, X1, X2 Tracks
With the CL-12, L, R, X1 and X2 may be armed for recording, or unarmed.
To arm L, R, X1, X2 tracks for recording:
1. Press and hold down the ARM button.
2. Press the rotary OUTPUT control(s) corresponding to the output track(s)
you want to arm.
When armed, each output track’s ARM LED illuminates red.