Sound Devices 664, Руководство пользователя

Страница: 164 / 183

User Guide
164
Routing Input Channels
With the CL-12, routing input channels to the left or right mix bus and the X1 or
X2 output is quick and easy.
To route an input channel or multiple input channels:
1. Do either of the following:
X
Press the input channel’s SEL button.
X
Select multiple input channels, using their SEL buttons.
2. Press the L, R, X1 or X2 output control to route to L, R, X1 or X2,
respectively.
Routing to X1 or X2 can be pre- or post-fade. Press the X1 or X2 output
control to cycle through the options: Route Off, Route Pre-fade, Route Post-
fade. When routing is pre-fade, the X1 and X2 LEDs illuminate green. When
routing is post-fade, the LEDs are yellow.
i
Alternatively, you can press and hold an L, R, X1, or X2 control, and then press
one or more SEL button(s) for the input channel(s) you want to route to that
output.
i
TIP: For continuous pan control, set an input channel’s routing to both L and R,
then use the Pan control on the 6-Series mixer to smoothly adjust pan. This will
ensure that an input’s pan position will be retained when disconnecting and recon -
necting the CL-12.
Adjusting Output or Track Levels
The CL-12 has four rotary controls labeled OUTPUTS that are used for adjusting
either output or track levels, based on which mixer is connected to the CL-12
and how the controls are configured.
On the 633 and 664, the CL-12’s Output controls are used for adjusting track
levels for L, R, X1, and X2.
On the 688, however, the CL-12’s Output controls may be configured to adjust
either output or track levels for L, R, X1, and X2.
To configure CL-12 output controls:
1. Press MENU to access the 688’s Main menu.
2. Select CL-12 > L - X2 Level Controls.
3. Select one of two options: Adjust Output Level or Adjust Track Level.
To adjust levels:
X
Turn the Output control corresponding to which level you want to adjust: L,
R, X1, or X2. The level value is displayed on the mixer’s LCD in the HP field.