Sound Devices 664 Скачать руководство пользователя страница 157

Страница: 157 / 183

157

CL-12 LINEAR FADER CONTROLLER

Right: Buttons and HP Encoder

The area that spans the right side of the mixing surface has transport controls

and numerous buttons for quick access to many key features. For convenience,

the buttons are grouped in sections according to common functionality.

Not all features described here are available with every mixer. For more

information, see

CL-12 Comparison Chart

ection

uttons

ame

escription

Transport

Controls

Record

While the Transport Control on the

mixer operates normally when the CL-

12 is attached, this alternate, backlit

Record button provides an additional

control for starting a recording.

Stop

This alternate, backlit Stop button

provides an additional control for stop

ping a recording or playback, or (when

stopped) viewing the next take’s file

name.

Channel

Select Tools

Channel Select tools operate on the currently

selected channel(s).

Press to toggle a channel on or

off. When on, the input’s ON LED

illuminates yellow.

ARM

Press to arm or disarm the channel.

When armed, the input’s ARM LED

illuminates red.

NAME

Press this button to display and edit

the currently selected channel’s track

name. This name is embedded as

metadata within the recorded files.

This functionality only works when

one input is selected. If multiple

inputs are selected when the NAME

button is pressed, a warning message

appears instructing the user to select

a single input.

HPF

Press to toggle on or off high-pass

filtering for a selected input channel.

For more information, see

Using High-

pass Filters

Phase

Press to toggle the phase of aselected

input channels. When inverted, the

PHASE button illuminates orange.

Содержание 664
























































































































































































Результаты поиска

Содержание 664

Отзывы:

Бренды по названию

Популярные бренды

Sound Devices 664, Руководство пользователя

Результаты поиска

Содержание 664

Отзывы:

Бренды по названию

Популярные бренды