manualshive.com logo in svg

Sound Devices 664, Руководство пользователя

Поделиться
Скачать
Sound Devices 664 Скачать руководство пользователя страница 110

User Guide

110

monitor.

3.  Adjust the levels on each mixer accordingly. 

Linking to a 442 or 302 

Because the 442 and 302 do not have LINK I/O ports, their signals are taken 

from their Mix Out jacks, which are not compatible with LINK I/O, so their gains 

have to be adjusted to compensate. When linking from smaller mixers into the 

664, using the XL-TA35 cable, their gains have to be increased by about 12 dB 

to match the other 664 inputs.

 

i

The XL-TA35 cable does not provide for linking the headphone buses.

When the 664 is linked with a 442 or 302, all input channels will be present on 

the stereo master bus of the 664. Return audio and PFL only occur on the head

-

phone output of the mixer on which it is performed.

To link a 664 to a 442 or a 302:

1.  Use the Sound Devices XL-TA35—a 12-inch, TA5F to 

TA3F accessory cable, as shown—to connect the Link 

I/O of the 664 to the Tape Out/Mix Out connector on 

the 442 or 302. This sends the stereo mix of both 

mixers directly to the stereo master bus of the 664. 

 

i

The 442 has two Tape Out/Mix Out connectors, a 3.5 mm and a TA3. The connec

-

tor on the 302 is an unbalanced stereo TA3F. For the most secure connection, use 

the TA3 Tape Out/Mix Out connector. The TA3 connectors on a 442 and 302 are 

wired accordingly: pin 1=ground, pin 2=left, pin 3=right.

2.  Monitor and record the stereo sum of all input channels on the master bus 

of the 664.

3.  Adjust the levels on each mixer accordingly. 

Linking to a MixPre-D

Because the MixPre-D does not have a LINK I/O port, its signals are taken from 

the Tape Out jack, which means gain must be adjusted to compensate. When 

linking a MixPre-D to the 664, using the XL-TA25 cable, the gain has to be ad

-

justed just short of clipping to match the other 664 inputs.

 

i

The XL-TA25 cable does not provide for linking the headphone buses.

When the 664 is linked with a MixPre-D, all input channels will be present on 

the stereo master bus of the 664. Return audio and PFL only occur on the head

-

phone output of the mixer on which it is performed.

Содержание 664
























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды