Sound Devices 633 Скачать руководство пользователя страница 47

Страница: 47 / 84

new daily folder. With an example date of August 20th, 2012, the naming format of the daily folder

would be: 12Y08M20. The name of the Mid-Level folder will also be stored in the TAPE field of the

iXML and bEXT chunks of all subsequently recorded WAV files.

Bottom-Level folder.

The Bottom-Level folder can be named manually, by scene name, or set to

<None>

. When set to

<Scene>

, a new folder will be created each time the scene name is changed.

Automatic File splitting

During recording, the 633 will split a take that exceeds 4 GB into multiple files. The split is sample-

accurate, so files joined together in post-production will be seamless. The maximum file size that the

633 creates can be adjusted from the Setup Menu option

FILE STORAGE > File Max Size

. The follow-

ing file size options are available:

•

4GB

•

2GB

•

1GB

• 640MB

• 512MB

When recording MP3 files, splits will not be seamless.

Metadata Fields

633 Broadcast Wave Files include iXML (revision 1.5) data and bEXT chunk data. For bEXT and iX-

ML-aware software applications this data is available. For applications that don’t recognize bEXT or

iXML, this information is ignored. The following chart details the supported metadata parameters.

• iXML: Metadata stored in the Broadcast Wave iXML chunk

• bEXT: Metadata stored in the Broadcast Wave bEXT chunk

• FMT: Metadata stored in the Broadcast Wave Format chunk

= supported

Metadata

Type

Notes

U = Entered by User

M = Automatically Entered by the Machine

Read

Write

General Information
Project

iXML

U; via Folder Options menu Top-Level

Roll (Tape)

iXML, bEXT

M; uses creation date or is overridden by User

U; via Folder Options menu Mid-Level

Scene

iXML, bEXT

U; via Scene Name menu

Take

iXML, bEXT

M or

U; via Take Name menu

Notes

iXML, bEXT

U; via HDD menu

Circle Take

iXML

U; via Take List menu

File UID

iXML

M; Unique File Identifier

File Sample Rate

iXML, FMT

U; via the Sample Rate menu

Digitizer Sample Rate

iXML

U; Actual sample rate of AD converter

Bit Depth

iXML, FMT

U; via Bit Depth menu

Channels

iXML, FMT

U; Number of channels (tracks) in the file

Time Code Information
Frame Rate

iXML, bEXT

U; via Frame Rate menu

TC Flag (ND or NDF)

iXML, bEXT

U; via Frame Rate menu

Start Time Code

iXML, bEXT

M; Stored as a sample count since midnight

File Manag

ement

633 User Guide and Technical Information

Содержание 633





















































































Результаты поиска

Содержание 633

Отзывы:

Sound Devices 633, Руководство пользователя и техническая информация, Страница: 47 / 84

Результаты поиска

Содержание 633

Отзывы: