Sound Devices 633 Скачать руководство пользователя страница 34

Страница: 34 / 84

Adjusting Output Levels

The nominal level of analog outputs can be adjusted from Setup Menu op-

tions

OUTPUTS > XLR-L Out

OUTPUTS > XLR-R Out

OUTPUTS > TA3-X1 Out

, and

OUTPUTS > TA3-X2 Out

. The available options are

Mic

Line

, and

-10

The master level of L, R, X1, X2, X3, and X4 buses can be adjusted in 1 dB increments from 0 dB

down to -30 dB / Off. To adjust the bus levels of L, R, X1, X2, X3, or X4 buses:

1. Press the

Meters Button repeatedly until a Meter View is displayed that includes the output

to be adjusted.

Rotate the Select Encoder to highlight the meter label of the output to be adjusted.

Press the Select Encoder. The background of the output’s meter label will become yellow to

indicate that level adjustment mode is accessed.

Rotate the Select Encoder to adjust the level. The dB value will be displayed in the lower right

corner of the LCD during adjustment.

Press the Select Encoder again, or wait 2 seconds. The background color of the meter label

will become grey to indicate exit from level adjustment mode.

Output level adjustments do not affect tone signal from the 633’s tone generator.

633 User Guide and Technical Information

v. 1.02

Features and specifications are subject to change. Visit www.sounddevices.com for the latest documentation.

Output Se

tup and Contr

Содержание 633





















































































Результаты поиска

Содержание 633

Отзывы:

Sound Devices 633, Руководство пользователя и техническая информация, Страница: 34 / 84

Результаты поиска

Содержание 633

Отзывы: